Stainless steel expansion bolts is one of the stainless steel fastener products, its application is very wide, so how to install stainless steel expansion bolts? Aozhan fastener manufacturers will explain to you.
Installation method of stainless steel expansion bolts：
1, first of all, use a hand drill to punch holes in the wall, hole diameter according to the size of the bolt, generally the same as the outer diameter of the expansion bolt, and larger than the screw to a number, after punching the hole and then the expansion bolt into the hole, but can not screw off the nut, in order to avoid holes drilled too deep, the expansion bolt fell into the hole is not convenient to remove.
2, after the nut is tightened and feel the expansion bolt tighter and not loose then twist off the nut, and then the hole will be fixed with the expansion bolt screw connection, and then the spring pad nut twist tight can be.
3, according to the diameter of the expansion tube wall holes, if the wall tile is relatively soft, can choose a small twist drill, part of the expansion tube to all into the wall, as long as the screw part is long enough, the deeper the casing part the stronger.
The above is an introduction to the installation method of stainless steel expansion bolts, I hope it will be helpful to you.
Nanning Aozhan Hardware Fastener Co., Ltd. is the main production and manufacture of hexagonal bolts, flange face bolts, expansion bolts, self-tapping nails, drill tail nails, studs, tooth bars and other fastener products, the above-mentioned stainless steel expansion bolts is one of the main products of our factory, the purchase of stainless steel expansion bolts choose Aozhan bolt products, the choice of stainless steel materials, flat and beautiful, wide range of applications, simple operation. You can send email: info@aozhanfasteners.com to get preferential quotation, welcome to consult.
Post time: Sep-24-2022
