PriceList for Stainless Steel Hexagon Screws - 304/316 Eyebolts DIN580 Stainless Steel – Aozhan

Description

DIN580 eye bolts have a ring-shaped head from the outside. They are used for lifting and have threaded fasteners at the tail. The DIN580 lifting eye screw must be installed vertically on the plane of the workpiece, and the joint surface must be flat and the joint must be tight. The eyebolt must be screwed in until it is in close contact with the bearing surface, but it is not allowed to use tools to tighten.

Precautions for the use of eye bolts:

1. The user must be trained before using the product, in order to use the product correctly and ensure safety;

2. For different occasions and application scenarios, choose the correct type, grade and length of eyebolts;

3. Before use, check carefully to see if there is any damage, if so, replace it immediately;

4. Rotate until it is in close contact with the support surface, and it is not allowed to use the tool plate to tighten;

5. For different types of lifting ring screws, the lifting direction should be within the range of the force direction. For example: the lifting ring screw has national standard, American standard and other standards, to ensure that it is within its force range;

6. The maximum lifting weight is the rated load, which cannot be overloaded, otherwise serious consequences will occur;

7. If the wear exceeds 10% of the diameter of the interface during use, it must be stopped. If it is forced to use, it is prone to safety accidents.

Quality Inspection

Production Process

Application Diagram